MagnetoSpeed V3 Ballistic Chronograph in Soft Case
PLEASE NOTE: This item is no longer available, but the MagnetoSpeed V3 Ballistic Chronograph in Hard Case is available!
The MagnetoSpeed V3 ballistic chronograph kit was designed to be used on barrels and suppressors from 1/2 inch all the way up to 2 inches in diameter. In addition to the larger diameter tolerance, the V3 also has one inch more clearance in the blast zone to account for longer (up to 3.5" in most cases) muzzle brakes, flash hiders, etc.
MagnetoSpeed V3 features an improved designed with the following features:
- Improved Display
- Three-button menu system
- Battery options are; (1) 9-Volt or (2) CR123s
- Easy access battery compartment, no need for screwdriver to swap batteries
- Improved shooting modes, with the ability to now operate with air guns
- Downloadable firmware updates
- Advanced data logging and troubleshooting capabilities
- More compact and rugged display housing
- Rapid mode with rate-of-fire
- Redesigned Bayonet
- Rugged strapping system; with metal buckle and triad thumb nut
- Proven technology with updated sensor design
- New profile and color scheme
- New bracket to allow for future alternative attachment options
- Dual data connection points
Kit includes:
- Display Unit
- Retractable connection cable
- Standard 6ft connection cable
- Stainless steel blast shield
- Thick and thin rubber V-block spacers
- microSD card with adapter
- Bayonet sensor
- Polymer spacer kit with screw hardware and allen wrench
- Heavy duty strap with thumb nut tightener
- Soft case with custom foam cutouts
- Alignment rod
- Instructions
Note: DO NOT MOUNT BAYONET ON ANY SUPPRESSOR COVERS. THE BAYONET MUST BE MOUNTED DIRECTLY ON TO THE SUPPRESSOR TO ENSURE PARALLEL MOUNTING AND PREVENT POSSIBLE BULLET STRIKES.
What is the difference between the V3 and Sporter Models?
The main difference is that the Sporter can fit on barrels from .5" to 1" in diameter. The V3 can fit on barrels and suppressors from .5" to 2" in diameter. Use this comparison chart to see major and minor differences.
Downloads
MagnetoSpeed User Manuals
MagnetoSpeed V3 Ballistic Chronograph User Manual
(Size: 1.4 MB)
MagnetoSpeed V3 Rail Adapter Instructions
(Size: 232.8 KB)
MagnetoSpeed XFR Smart Phone Connector Instructions
(Size: 732.3 KB)
MagnetoSpeed Downloads
MagnetoSpeed V3 Chronograph Firmware (Version V.3.0.04)
(Size: 165.3 KB)
V3 Firmware Change Log
(Size: 93.7 KB)
Reviews
Posts
Support
Product Questions
The accuracy of our chronographs can be expected to be between 99.5% and 99.9%.
... PermalinkYes, solids should perform about the same as standard copper-jacked rounds. If the round is made out of something that has very low electrical conductivity (like lead) you may have to make the device more sensitive by changing the bullet type setting, but most solids should work with the default settings.
... PermalinkThe MagnetoSpeed display unit saves a CSV (http://en.wikipedia.org/wiki/Comma-separated_values) file which can be opened by most any spreadsheet program or text editor. If you want to start a new log file, simply use your computer to rename or delete the LOG.CSV file on the micro SD card and a new one will be created. Renaming the file with the date is a good way to keep track of your data.
... PermalinkYes, the MagnetoSpeed V3 was designed to work with larger barrels and suppressors up to 2 inches in diameter. The Sporter was designed to be used with rifles up to 1" in barrel diameter. If you require a custom lab setup for rail mounted guns please contact us for details on our custom services.
... PermalinkThe main difference is that the Sporter can fit on barrels from .5" to 1" in diameter. The V3 can fit on barrels and suppressors from .5" to 2" in diameter. Use this comparison chart to see major and minor differences.
...
Permalink
Yes. All bayonets and displays are compatible with each other.
... PermalinkPlease reference the QUICK START guide in your instructions. Make sure that you have the thumbnut at the very bottom of the threads before mounting the bayonet on your barrel.
... PermalinkThis means that you will need to do a firmware update on your chronograph. Please see the directions found here: Firmware update
... Permalink