Frequently Asked Questions

MagnetoSpeed Manuals and Downloads

MagnetoSpeed Downloads

This document shows the steps on how to create an order for customers who are tax exempt.

<p>WARNING: Before you start the update, back up any archived data. The upgrade will clear the SD card. Place your cursor over the link, RIGHT CLICK, and select SAVE LINK AS to download directly to your computer. Make sure the file to the firmware is kept as a HEX FILE. Do not change the format to anything else, and make sure it is not a hyperlink. The file name MUST be named fw.hex (lowercase only). Once the file is on your computer, remove the SD card from your V3 display and put it into your computer's SD card slot. Use the larger microSD card adapter (included in the V3 kit) if needed. Copy and paste OR drag the file from your computer to the SD card. Remove the SD card from your computer and re-insert it back into the V3 display. Here is the link to the instructional video that shows you how to start the Bootloader program on the V3 display: https://www.youtube.com/watch?v=oyG1PWWsqwg. Please select slow upgrade, not regular upgrade, when prompted by the display. The update will take about 4-5 minutes. When SUCCESS shows up on the display, follow the prompts on the display to get back to the ready screen. If you have any issues, please email rhey@magnetospeed.com.</p> <p>WARNING: Computers/laptops with Windows-based OS are recommended. Mac and Mac products will be difficult to download the file in the correct format.</p>

Documents shows the latest firmware revision and previous revisions as well.

Did you find what you were looking for?